All Categories
    Filters
    Preferences
    Search

    Ethernet Surge Protector Outdoor PoE Gigabit Surge Suppressor

    $30.99
    • Outdoor Ethernet Surge Protector for Gigabit and PoE/High PoE+ (HPoE) Ethernet Networks
    • Gigabit 10/100 and 1000 Mbps data rate
    • High PoE+ Input up to 60V 1.5A HPoE
    • All 4 pairs are protected by the reliable differential Gas Discharge Tube (GDT) and the bi-directional Transient Voltage Suppressing (TVS) array
    • RJ45 CAT5 CAT5E CAT6
    Outdoor Ethernet Surge Protector High PoE+ Gigabit Lightning Surge Suppressor
    10/100/1000 MbPS Data Rate CAT5E CAT5 CAT6
    • Outdoor Ethernet Surge Protector for Gigabit and PoE/High PoE+ (HPoE) Ethernet Networks
    • Gigabit 10/100 and 1000 Mbps data rate
    • High PoE+ Input up to 60V 1.5A HPoE
    • All 4 pairs are protected by the reliable differential Gas Discharge Tube (GDT) and the bi-directional Transient Voltage Suppressing (TVS) array
    • RJ45 CAT5 CAT5E CAT6
    All 4 pairs are protected by the reliable differential Gas Discharge Tube (GDT) and the bi-directional Transient Voltage Suppressing (TVS) array
    Provide transient protection for the protected differential line pair to
    IEEE 802.3 af/at (Transmission)
    IEC 61000-4-5 (Lightning/Surge) 20KA( 8/ 20μ s )
    PoE input voltage Vmax up to 60V
    PoE input current Imax up to 2A
    Fast Response Time (<3ns)
    Extremely Low Capacitance (<3pf)
    Shielded/Grounded RJ-45 Jacks
    Bi-directional clamping
    Removable board design for easy installation
    Impact and weather resistant enclosure with locking hinged cover
    Mounting holes at the rear of the enclosure
    Cable grommet may be adjusted to cable size and are removable
    IEC61000-4-5 and CORE 1089 compliant
    RoHS compliant
    Clamping Voltage:
    Line-Ground: 72 Volts
    Line-Line: 2.8 Volts
    Maximum Impulse Discharge Current (8/ 20μ s ) 20 KA
    Maximum Capacitance <3 pf
    PoE Maximum Input Voltage Vmax 60 V
    PoE Maximum Input Current Imax 2 A
    Protection Modes Line-Line, Line-Ground
    Standard Connectors Shielded RJ-45 Female * 2
    Enclosure Material Poly-carbonate
    Enclosure Color Gray
    Ground Lug 12 AWG Max.
    Operating Temperature -40°C (-40°F) to +80°C (+176°F)
    Outside Dimensions (W*L*H) 78*103*49 mm
    Weight: 110 g
    Existing reviews
    works
    I used this to protect network from another building maintained 1000Mbs conductivity between switches. I hope I will never find out if it really works or not. Seems well built metal RJ45 connectors and sturdy plastic box with weather sealing although mine is indoors.
    From: Guest | Date: 5/2/2013 9:32 PM
    Was this review helpful? Yes No (0/0)
    Spark tubes instead of varistors
    It seems to work just as well as the one originally provided by my internet provider. Maybe even better. The original one is designed with varistors, which can overheat and explode during lightning attacks. This one is designed with spark gap tubes, which are less likely to explode. Varistors have other advantages, and spark tubes have other disadvantages, but for this application, I like spark tubes better.

    Several lightning storms later, it is still going strong, which I cannot say for the last varistor version. But then, the effects of lightning are rather unpredictable, so it may just be random chance.
    From: Guest | Date: 7/23/2014 9:29 PM
    Was this review helpful? Yes No (0/0)
    This is an excellent unit.
    This is an excellent unit. - But do make sure you are using them with shielded cable.

    We have some underground lines between buildings and are using these to replace another companies units which we have had historical issues with.

    Basically, our previous units would burn out when there was a lightning activity anywhere remotely near us, these seem to not be bothered as much by that while still providing good protection.

    All of these surge protectors really need shielded cable though, so keep that in mind.
    From: Guest | Date: 7/23/2014 9:34 PM
    Was this review helpful? Yes No (0/0)
    Saved all my stuff
    Saved all my pc , modems , routers... i was hit by lightning 1.5 years after first instalation ... just replace the arrestor and one rj45 conector....
    From: Guest | Date: 8/31/2014 9:35 PM
    Was this review helpful? Yes No (0/0)
    Excellent
    This unit does not restrict any traffic flow. The only downside is that you have to crimp in your own grounding line.
    From: Guest | Date: 9/4/2014 9:36 PM
    Was this review helpful? Yes No (0/0)
    Gigabit!
    What I thought to be an issue with the device was actually a problem with the patch cables. I had to order a network cable tester to figure that out. The culprit cables are repaired now and the device functions as it should.

    It does great at what it is ment to do. However, i dont believe that it will throughput gigabit. My gigabit switch believes it is connected to a 100 megabit source. The source is from my gigabit router and this is the only break in that connection. I will try a different gigabit surge solution and report back
    From: Guest | Date: 2/2/2015 8:33 PM
    Was this review helpful? Yes No (0/0)
    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent
    Outdoor Ethernet Surge Protector High PoE+ Gigabit Lightning Surge Suppressor
    10/100/1000 MbPS Data Rate CAT5E CAT5 CAT6
    • Outdoor Ethernet Surge Protector for Gigabit and PoE/High PoE+ (HPoE) Ethernet Networks
    • Gigabit 10/100 and 1000 Mbps data rate
    • High PoE+ Input up to 60V 1.5A HPoE
    • All 4 pairs are protected by the reliable differential Gas Discharge Tube (GDT) and the bi-directional Transient Voltage Suppressing (TVS) array
    • RJ45 CAT5 CAT5E CAT6
    All 4 pairs are protected by the reliable differential Gas Discharge Tube (GDT) and the bi-directional Transient Voltage Suppressing (TVS) array
    Provide transient protection for the protected differential line pair to
    IEEE 802.3 af/at (Transmission)
    IEC 61000-4-5 (Lightning/Surge) 20KA( 8/ 20μ s )
    PoE input voltage Vmax up to 60V
    PoE input current Imax up to 2A
    Fast Response Time (<3ns)
    Extremely Low Capacitance (<3pf)
    Shielded/Grounded RJ-45 Jacks
    Bi-directional clamping
    Removable board design for easy installation
    Impact and weather resistant enclosure with locking hinged cover
    Mounting holes at the rear of the enclosure
    Cable grommet may be adjusted to cable size and are removable
    IEC61000-4-5 and CORE 1089 compliant
    RoHS compliant
    Clamping Voltage:
    Line-Ground: 72 Volts
    Line-Line: 2.8 Volts
    Maximum Impulse Discharge Current (8/ 20μ s ) 20 KA
    Maximum Capacitance <3 pf
    PoE Maximum Input Voltage Vmax 60 V
    PoE Maximum Input Current Imax 2 A
    Protection Modes Line-Line, Line-Ground
    Standard Connectors Shielded RJ-45 Female * 2
    Enclosure Material Poly-carbonate
    Enclosure Color Gray
    Ground Lug 12 AWG Max.
    Operating Temperature -40°C (-40°F) to +80°C (+176°F)
    Outside Dimensions (W*L*H) 78*103*49 mm
    Weight: 110 g
    PRICE BREAKS - The more you buy, the more you save
    Quantity
    2+
    10+
    50+
    100+
    Price
    $29.99
    $28.99
    $27.99
    $26.99
    Customers who bought this item also bought

    Ethernet Surge Protector PoE Gigabit Surge Suppressor

    From $16.99
    • Surge protection for Gigabit and PoE/High PoE+ (HPoE) Ethernet Networks
    • Gigabit 10/100 and 1000 Mbps data rate
    • High PoE+ Input up to 60V 720mA HPoE
    • Gas Discharge Tubes (GDT)

    Waterproof Ethernet Surge Protector High PoE+/ESD Gigabit 1000Mbs Protection

    $59.99
    Waterproof / Weatherproof Ethernet Surge Protector for Gigabit and PoE/High PoE+ (HPoE) ESD Ethernet Networks
    Gigabit 10/100 and 1000 Mbps data rate
    High PoE+ Input up to 60V 2A HPoE
    Multi stage protection for all 4 pairs by the reliable differential Gas Discharge Tube (GDT) and the bi-directional Transient Voltage Suppressing (TVS) array
    Electrostatic Discharge (ESD) protection
    Complies with UL 497B and the used key component Gas Discharge Tubes (GDT) are recognized in accordance with UL 497B under UL file number E223314