Ethernet Extender Kit - 2pc Pair TEX-100 - Range up to 1 Mile over Phone Copper Wire or Network Cable

by Tupavco
$219.00

UPC: 741360889125

Ethernet Extender Kit (2pc) TEX-100 VDSL2 is a high-speed, Long Reach Ethernet Booster/LAN Repeater with one RJ45 Ethernet port and one RJ45 VDSL port. Bridge modem use VDSL2 technology to extend ethernet wire service over single-pair phone line or CAT5 cable, CAT6 cable. VDSL2 Ethernet Extender features 100Mbps of symmetric data rate over telephone/phone wire or ethernet cable kit.

Use two TEX-100 VDSL2 Extenders (Sender/Receiver) in CO and CPE mode to establish a point-to-point connection extension in your network.

Features

-Support flow control on Fast Ethernet port via PAUSE frame or Back Pressure
-IEEE 802.1Q VLAN tag transparent
-Easy PnP installation network booster broadband distance range extender
-Selectable CPE and CO mode and VDSL2 profile (17a or 30a) via DIP switch are built in the ethernet repeater
-Ethernet bridge VDSL2 profile mode (17a or 30a) for high data rate
-Symmetric mode support the band plan G.997 and provide the symmetric transmission on both down and upstream
-Asymmetric Provides highest line rate in short range
-Selectable target SNR margin

Specifications

-Network Extender DIP Switch:CO/CPE mode,30a/17a Profile,Symmetric or Asymmetric,SNR margin 6dB/9dB
-LED:ACT/LNK,10/100Mpbs,Half/Full Duplex,CO/CPE,Idle/Trained/Link
-LAN Extender Interface:RJ-45,IEEE 802.3/802.3u/802.3x,10/100 Base-T Auto-Negotiation,Auto-MDI/MDI-X
-VDSL Interface:RJ-45,DMT Encoding,ITU-T G993.1/993.2/G.997.1,Surge Protector

Performance - AWG24 LAN Cable/Phone Cable Wire:
17a VDSL Profile-Down/Up stream

1000ft-100/72 Mbps
2000ft-42/46
3300ft-18/13
4000ft-16/7
5000ft-12/3
6000ft-9/2
6500ft-5/2
30a VDSL Extender
1000ft-100/100 Mbs
2000ft-40/45
2000ft-40/45
3000ft-22/19
4000ft-16/7
5000ft-12/3
6000ft-8/2
7000ft-5/2

The actual data may vary depending on copper wire and environment.